Again with the webcams…
I have 2 creative video IM’s and I am able to have them both attached to the system (x64). In touch, I am able to toggle (sort of, it seems the order of disableing them, toggle, enabling again is important) between the two; but I am unable to have 2 video in’s each attached to a different camera. I am trying to figure out if it is the driver causing the problem, or am I doing something else wrong
MD
FWIW I’m able to use 2 cameras at the same time, one using a USB input and one using firewire. I just have 2 video in TOPS, then use a switch TOP to change.
Jeff
i use two kworld dvd makers hooked up to cctv cams. they work but they’re not the best quality but neither are webcams generally. maybe worth a look in.
I can get:
3
Vimicro USB2.0 UVC PC Camera
Vimicro USB2.0 UVC PC Camera
Sony Visual Communication Camera
3
Vimicro USB2.0 UVC PC Camera
Sony Visual Communication Camera
HP 3-MegaPixel Webcam GX607AA
but not
3
Vimicro USB2.0 UVC PC Camera
Vimicro USB2.0 UVC PC Camera
HP 3-MegaPixel Webcam GX607AA
and so not
4
Vimicro USB2.0 UVC PC Camera
Vimicro USB2.0 UVC PC Camera
Sony Visual Communication Camera
HP 3-MegaPixel Webcam GX607AA
Ill keep playing with drivers, its gotta be some shared software between them…
Did you try connecting the cameras on different USB hubs?
cheers
markus