Noise Chop Timesliced 099 win 24410

Hi!
Since a long time ago had an issue with:

Noise Chop when Timeslice option is ‘On’ with higher Period values after the patch runs a long time (like 1-3 hours) - Noise Chop skips a lot of cooks.

youtu.be/IKZm0yGjrB0

Best,
Alex

Could you attach the example file, the video doesn’t help us diagnose the current time and other parameter settings. Thanks

Hi Ben,
Sure:
NoiseTimeSlice.toe (4.43 KB)

Best

Thanks, will let it run and try to reproduce.

This bug is still present in Win10 / 2020.22080

noiseChop_bag.toe (3.6 KB)
The example file is just a new noiseChop in a fresh scene, with 2 user defined channel names and in timeSlice mode.
At first it works fine but after playing around with the period value for a bit, or changing desktops in windows causes it to freeze.

Hi,

experienced this bug too: With time sliced activated when period of the Noise Chop goes higher than ~10 it looses a lot of cooks until time slice is toggled again. This can be reproduced by choosing a period from 0 > 100, after 15/20 it starts to jitter.

TD 2021.16270 / Win11 / RTX3060 Laptop

Was there any fix for this @ch3 @letsius @ben?

Thanks

After more research and trying to solve this without any luck, I now ended up building this workaround which gives now the same result as when the time slice mode with the noise chop is enabled. This is achieved by controlling the speed of translate of the noise chop with just one sample at a time, please see the toe attached, maybe someone finds it helpful or has a better suggestion.

timeslice fix.toe (3.8 KB)